Air Quality Testing
Compressed air is used in a wide variety of manufacturing and commercial applications, and in some industries the quality of the air is extremely important.
Compressed air typically has three main contaminants which are water, particles and oil.
Contaminants originate from three general sources:
1. Contaminants in the surrounding area of the compressor are drawn into the air system through the intake of the air compressor. Ingested contaminants appear in the form of water vapor, hydrocarbon vapours, natural particles and airborne particulates.
2. As result of the mechanical compression process, additional impurities may be introduced into the air system. Generated contaminants include compressor lubricant, wear particles and vaporized lubricant.
3. A compressed air system will contain in-built contamination. Piping distribution and air storage tanks, more prevalent in older systems, will have contaminant in the form of rust, pipe scale, mineral deposits and bacteria.
If the compressed air system has not been designed for your industry specific requirements, it has potential to cause major problems to product quality and operating expenses.
This is especially important for industries such as food and beverage and pharmaceutical if the air comes into direct contact with the product or indirect contact with the packaging.
In order to be compliant with industry standards, the quality of your compressed air should be considered as part of the hazard analysis and critical control point (HACCP) activity.
At Halward, we offer advice about your current compressed air system and provide quality solutions to ensure you achieve the air quality your business requires.Before we do anything, we ask the question: ‘what air quality do you require?’ We ensure our analysis and recommendations align 100% with industry standards, including taking into account environmental factors in accordance with your system design.
Approx. Rs 3,500 / DayGet Latest PriceProduct Details:
|Mode Of Report||Hard as well as Sof copy|
|Type Of Air||Industrial Air and Gas|
|Service Completion||<24 Hours|
ISO 8573 Testing
ISO 8573 is an internationally recognised standard that defines major contaminants in compressed air and presents a comprehensive system for air purity designations. The implementation of this standard supports accurate testing of the major contaminants in compressed air – particles, water, oil, and microorganisms. ISO 8573 is used widely throughout the compressed air industry, acting as a common language available to the manufacturer, compressed air system supplier, and compressed air testing laboratory.
For applications where the quality of compressed air is critical and requires validation to ISO8573 standard Direct Air can provide this service.
Our trained engineers can visit your site with our calibrated ISO 8573 air quality testing equipment. Once on site we can measure the quality of the compressed air and validate quality parameters including particles, dew point and oil vapour content of the compressed air.
Approx. Rs 1,800 / DayGet Latest PriceProduct Details:
|Minimum Order Quantity||1 Day|
|Drying Capacity||upto 5000 CFM|
|Dryer Technology||Refregerated, Desiccant, HOC, Blower Reactivated and NLSF|
Properly maintained Refrigerated Dryers and Desiccant Dryers can have a significant impact on compressed air systems. Properly treated compressed air, and the right air dryer, will improve productivity, system efficiency, and product or process quality.
An air dryer is an integral piece in your air treatment system, making use of Halward’s wide knowledge and expertise in the filed of Compressed Air Dyer Repairs and Maintenance is a key aspect to the success of your compressed air system.
Halward provide Repairs and Maintenance service for all known brands of Compressed Air Dryers in the following Technologies.
1. Refrigerated Type
2. Desiccant / Heatless Type
3. Blower Reactivated Dryer
4. Heat of Compression Dryer
5. No Loss Split Flow Dyer
We supply all components and services required to run your Compressed Air drying systems efficiently
Approx. Rs 3,000 / NumberGet Latest PriceProduct Details:
|Range||+30 to -100 Deg C|
|Mode Of Report||Hard Copy|
Transcat now calibrates:
Our accredited capabilities are:
The WIKA calibration laboratory is accredited by the National Accreditation Board for Testing and Calibration Laboratories (NABL) in accordance with ISO/IEC 17025:2005 for the measurement parameters pressure and mass.
Approx. Rs 3,500 / DayGet Latest PriceProduct Details:
|Property Location||Hospitals, Paint Booths, etc|
|Type Of Air||Breathing Air|
Breathing Air Testing
All employers have a duty of care to their employees to ensure that the breathing air they are supplied with is adequate for the respiratory protective equipment (RPE) they are using and safe to breathe.
Compressed gas for breathing should not contain contaminants at a concentration which cause harmful effects. In any event, all contaminants shall be kept to as a low a level as possible and shall be less than 1/10 of a national 8-hour exposure limit.
Periodically testing air quality makes sure that the control measures you have put in place are delivering the air quality required by BS EN 12021. The frequency of such tests should be the result of a risk assessment and take place at least every three months if not sooner.
Halward can perform regular air quality checks to help keep your facility safe and compliant to current regulations and advised standards.
Records of completed breathing air checks must be retained in either physical or electronic form for a minimum of 5 years.We measure the followingcontaminents in Air
Approx. Rs 1,800 / NumberGet Latest PriceProduct Details:
|Analysis Type||Hydrostatic and Ultrasonic Tests|
|Components Of Testing||Pressure Vessels|
|Place Of Testing||On Site|
|Location||Maharashtra and Goa|
Most businesses undertake inadequate inspection and maintenance of pressure vessels, specifically air receivers.
Pressure vessels can fail and explode, potentially causing injury and death. As there are substantial risks associated with failing to work safely with your air receiver, there is a legislative framework in every state of India that sets minimum requirements for controlling risk, and for consultation.
If your workplace contains an air receiver, you are responsible for ensuring:
Once an inspection is complete, our technician will sign off his report that concludes the receiver is safe to use. This covers you from any liability in the unlikely event something goes wrong.
Following the inspection, you are provided with an in-depth report that details the specifications of your pressure vessel, any components that were replaced, as well as detailed comments confirming its compliance. For extra peace of mind, our team will contact you when your next interval arrives & book a time that suits you.
Approx. Rs 2,200 / DayGet Latest PriceProduct Details:
|Location/City||Maharashtra and Goa|
|Warranty After Repair||Yes|
We also have the expertise to provide our clients with top quality Compressors Repairing Services. Our team of skilled and trained professionals are engaged in the overhauling and maintenance of various types of compressors. These services are updated and upgraded as per the latest industrial standards to ensure minimum downtime of your equipments.
Explore More Products